阿里云服务器挂载硬盘(阿里云服务器挂载数据盘)
本文目录一览:
阿里云ECS挂载硬盘
[root@test ~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000b6c99
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 100.4 GB, 107374182400 bytes, 209715200 sectors 需要挂载的磁盘
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@test~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc247eca8.
Command (m for help): n 输入n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p 输入p
Partition number (1-4, default 1): 1
First sector (2048-209715199, default 2048): 回车
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): 回车
Using default value 209715199
Partition 1 of type Linux and of size 100 GiB is set
Command (m for help): wq 输入wq退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@test~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000b6c99
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc247eca8
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209715199 104856576 83 Linux 已创建/dev/vdb1分区
[root@test~]# mkfs.ext4 /dev/vdb1 格式化磁盘
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
6553600 inodes, 26214144 blocks
1310707 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2174746624
800 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@test~]# mkdir /mnt 创建挂载目录
mkdir: cannot create directory ‘/mnt’: File exists
[root@Hilbert ~]# echo /dev/vdb1 /mnt ext4 defaults 0 0 /etc/fstab
[root@Hilbert ~]# cat /etc/fstab 写入新分区信息
#
# /etc/fstab
# Created by anaconda on Wed May 25 02:12:53 2022
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=d71b01a9-bf24-4afb-b7d9-3a0961522139 / ext4 defaults 1 1
/dev/vdb1 /mnt ext4 defaults 0 0
[root@test~]# mount /dev/vdb1 /mnt 把分区挂载在/mnt目录下
[root@test~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 3.9G 608K 3.9G 1% /run
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/vda1 40G 2.1G 36G 6% /
tmpfs 783M 0 783M 0% /run/user/0
/dev/vdb1 98G 61M 91G 1% /mnt 新挂载的分区
阿里云Ubuntu挂载数据盘
这两天将阿里云上的服务器改为Ubuntu系统,原有的数据盘需要重新挂载。过程如下。
首先可以使用fdisk -l 查看磁盘状态,看到数据盘是/dev/vdb.
然后使用fdisk /dev/vdb来管理数据盘,由于对linux不熟悉,频繁使用m命令查看帮助。根据经验,首先使用d命令删除现在的分区,然后使用F命令查看未分区部分,接下来使用n命令创建新的分区,使用缺省参数创建,最后使用w保存。
然后进行格式化,命令是mkfs.ext3 /dev/vdb1
格式化完成后,映射到一个目录:
echo '/dev/vdb1 /mydata ext3 defaults 0 0' /etc/fstab
然后使用mount -a 加载,可以使用df -h 查看是否加载成功。
记一次阿里云服务器如何实现数据盘挂载指定目录
数据盘的挂载基本上可以分为两大步,第一步分区并初始化磁盘;第二步挂载。
接下来带大家看看具体的操作及命令。
首先使用fdisk -l 查看需要挂载的数据盘:
开始对磁盘分区这里就不分多个区了,只需要 fdisk /dev/vdb 然后 "n p 1 wq" 就完成了分区:
最后挂载磁盘到指定目录 mount /dev/vdb1 /var/www/html (可以是任意目录) 并查看挂载情况 df -h
至此完成了整个数据盘的挂载,无需重启服务器就可以开始使用了。
发表评论
暂时没有评论,来抢沙发吧~